Home |
Search |
Today's Posts |
|
#1
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
Again, this doesn't have much to do with car audio, but I know there are
some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? Thanks in advance. |
#2
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
Normal shielding techniques are adding a bucking magnet (additional
magnet glued to the backplate in reverse magnetic polarity so it helps cancel the external magnetic field of the existing magnet structure) followed by a steel can that is glued over the top of the bucking magnet & motor assembly. JD MOSFET wrote: Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? Thanks in advance. |
#3
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
John is right .... and Madisound is one source that can supply bucking
magnets and covers. -RG "MOSFET" wrote in message m... Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? Thanks in advance. |
#4
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
Edit - already perfectly answered -- JimJ[VT] |
#5
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
In article , "MOSFET" wrote:
Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? When you change the magnetism, the sound will also change. The Qts of the drivers and sensitivity change. greg |
#6
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
The bucking magnet & shield impact EXTERNAL magnetic flux, not
internal... the motor works the same. JD GregS wrote: In article , "MOSFET" wrote: Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? When you change the magnetism, the sound will also change. The Qts of the drivers and sensitivity change. greg |
#7
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
In article , John Durbin wrote:
The bucking magnet & shield impact EXTERNAL magnetic flux, not internal... the motor works the same. Any change in the external will affect the internal I'm sure. The magnet is a complete unit, not just one area, but you can concentrate flux. You can buck or you can also add to the magnetism, when the magnets repel. I might have this backwards. A bucking magnet will attract.The magnetism will affect the Qes directly. greg JD GregS wrote: In article , "MOSFET" wrote: Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? When you change the magnetism, the sound will also change. The Qts of the drivers and sensitivity change. greg |
#8
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
I stand corrected... but the change is small & predictable so easily
taken into account when designing the driver in the first place. But, adding the bucking magnet to a driver not originally designed for it you could change the sound enough to be audible. Typical changes are lower Qes and therefore Qts, and a slight increase in efficiency. JD GregS wrote: In article , John Durbin wrote: The bucking magnet & shield impact EXTERNAL magnetic flux, not internal... the motor works the same. Any change in the external will affect the internal I'm sure. The magnet is a complete unit, not just one area, but you can concentrate flux. You can buck or you can also add to the magnetism, when the magnets repel. I might have this backwards. A bucking magnet will attract.The magnetism will affect the Qes directly. greg JD GregS wrote: In article , "MOSFET" wrote: Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? When you change the magnetism, the sound will also change. The Qts of the drivers and sensitivity change. greg |
#9
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
Question as I know jack squat about loudspeaker design: why don't
loudspeaker manufacturers then automatically make shielded speakers for car audio? Couldn't the magnetic fields potentially affect in-car electronics (like the vehicle's computer)? I would think any increase in efficiency would be a bonus also, even if very slight. I know many manufacturers already market "double-stacked" and "triple-stacked" magnets. Is there a lowered power handling with adding a bucking magnet? Brandonb John Durbin wrote: I stand corrected... but the change is small & predictable so easily taken into account when designing the driver in the first place. But, adding the bucking magnet to a driver not originally designed for it you could change the sound enough to be audible. Typical changes are lower Qes and therefore Qts, and a slight increase in efficiency. JD |
#10
Posted to rec.audio.car
|
|||
|
|||
Is there any way to magnetically shield a speaker?
In article , John Durbin wrote:
The bucking magnet & shield impact EXTERNAL magnetic flux, not internal... the motor works the same. Oh, I just wanted to add, a driver is best built from the getgo as far as flux leakage goes, as told by R. Pierce on many occasions. greg GregS wrote: In article , "MOSFET" wrote: Again, this doesn't have much to do with car audio, but I know there are some REAL knowledgeable folks here. For years I have been using a center channel that was not really designed as a center channel, but it's timber matches PERFECTLY my main speakers, a pair of Michael Green Designs. Anyway, I am rearranging my home-theater and want to put my center channel next to my TV (it was sitting on a shelf on the wall up high behind the TV so no problems were created). But obviously if I wish to put the speaker on top of my TV, the magnetic field will create havoc with my picture tube. The speaker I want to do this with has two 5" drivers and one 1" tweeter in the middle (it actually LOOKS like a center channel speaker). I know that typical magnetically shielded speakers have something that encases the magnet. Is this possible? Any other thoughts? When you change the magnetism, the sound will also change. The Qts of the drivers and sensitivity change. greg |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Audio Cables & Adapter Cables | Pro Audio | |||
Some Recording Techniques | Pro Audio | |||
Comments about Blind Testing | High End Audio | |||
A question for the cognoscenti autoformers | Vacuum Tubes | |||
additional speakers | Tech |