[Joe[_13_]]

I am very near to purchasing a pro tools HD system and the new C24 and
I have been reading the users manual to get a head start. My question is
related to metering on the C24. I understand that there is a meter
select button which selects either pre or post fader. Is there a way to
monitor the channel out level on the meter for setting preamp gains etc.
What modes (play, record, record arm etc) Does this work in. I couldnt
find an answer to this in the downloadable manual. The only thing I
found was reference to the pre-post meter select button.
Aloha
Joe
** Posted from http://www.teranews.com **

[[email protected]]

On Dec 10, 11:24*am, Joe wrote:
* I am very near to purchasing a pro tools HD system and the new C24 and
I have been reading the users manual to get a head start. My question is
related to metering on the C24. I understand that there is a meter
select button which selects either pre or post fader. Is there a way to
monitor the channel out level on the meter for setting preamp gains etc.
What modes (play, record, record arm etc) Does this work in. I couldnt
find an answer to this in the downloadable manual. The only thing I
found was reference to the pre-post meter select button.
Aloha
Joe
** Posted fromhttp://www.teranews.com**

You always monitor preamp input gain "pre-fader". You monitor output
"post fader". Output channels usually don't have a pre or post fader
setting, only post fader. Input channels have both.