Home |
Search |
Today's Posts |
#1
Posted to rec.audio.marketplace
|
|||
|
|||
FS: clean Crown XLS 402 stereo 400 watt power amp
This is a Crown XLS 402 stereo power amp in excellent condition. It
puts out 400 watts per channel into a 4 ohm load. Here are some more specs: Selectable high-pass filter on each channel. Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven. XLR inputs and binding post outputs (export models feature touch-proof binding post outputs) Frequency Response (at 1 watt) 20 Hz to 20 kHz: ±0.75 dB . Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 1 kHz: 0.15%. Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo, 8 ohms in Bridge-Mono. Two front-panel, black rotary level controls, one for each channel. Two front-panel red LEDs, one for each channel, illuminate when the channel's output signal is being overdriven. Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation. Check my feedback...over 1300 positives ! http://cgi.ebay.com/ws/eBayISAPI.dll...m=150013952145 |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stereo Amplifier Power Specifications | Tech | |||
rec.audio.car FAQ (Part 1/5) | Car Audio | |||
A Strawman, Constructed and Destroyed-Williamson's Folly? | Audio Opinions | |||
A Strawman, Constructed and Destroyed-Williamson's Folly? | Vacuum Tubes | |||
KISS 113 by Andre Jute | Vacuum Tubes |