Home |
Search |
Today's Posts |
#1
|
|||
|
|||
xtant amp no sound
I recently bought a used xtant 1001dx 1000 watt class d amp.I connect amp,
red power light comes on but no sound out of the subs, anyone know what could be wrong?Does anyone here know anyone that can repair these in northern California? |
#2
|
|||
|
|||
xtant amp no sound
I think the first thing I'd check is to make sure that the amp isn't in
protection mode and that it's getting a signal. Paul Vina "Dan S" wrote in message news:9qQGb.658450$Tr4.1665823@attbi_s03... I recently bought a used xtant 1001dx 1000 watt class d amp.I connect amp, red power light comes on but no sound out of the subs, anyone know what could be wrong?Does anyone here know anyone that can repair these in northern California? |
#3
|
|||
|
|||
xtant amp no sound
Its getting a signal but right now I have my factory cd deck going through
line out converters.This has worked fine on my other "cheap/midgrade" amps but I am looking at the install manual online and looks like there is allot of jumper settings on the amp and one is for line in input voltage.this could be my problem, as it sits it is set at the +20 setting =100-300mv I guess tomorrow I will have to get out my multimeter and check voltage and set the jumper accordingly. I wasn't planning running this amp with the factory deck, I just want to test it and know it works before I put it up in the closet until I get a aftermarket deck and higher power subs.I figured there should be some sound coming out the speakers even if the jumpers are not correct. "Paul Vina" wrote in message news:62SGb.138988$8y1.419204@attbi_s52... I think the first thing I'd check is to make sure that the amp isn't in protection mode and that it's getting a signal. Paul Vina "Dan S" wrote in message news:9qQGb.658450$Tr4.1665823@attbi_s03... I recently bought a used xtant 1001dx 1000 watt class d amp.I connect amp, red power light comes on but no sound out of the subs, anyone know what could be wrong?Does anyone here know anyone that can repair these in northern California? |
#4
|
|||
|
|||
xtant amp no sound
Keep in mind it will go into protection mode if the speakers are wired
wrong or if the ground is inadequate. What do you mean by "wired wrong"? If they are shorting, then yes it would hopefully go into protect. The ground being inadequate has nothing to do with it. The amp wouldnt care at idle. Les |
#5
|
|||
|
|||
xtant amp no sound
I tried this thing again today, I bought a new blaupunkt with rca outs and
set the voltage "in" jumper correct, same problem no sound.I don't see how I could get the speaker wiring wrong on it.It has parallel speaker outs, one + one - and I wired them that way.I guess this amp is broke.Maybe someone out here can fix and use it. If so I will let it go for $150 shipped to your door. "bdc" wrote in message ... On Fri, 26 Dec 2003 08:29:13 GMT, "Dan S" wrote: Its getting a signal but right now I have my factory cd deck going through line out converters.This has worked fine on my other "cheap/midgrade" amps but I am looking at the install manual online and looks like there is allot of jumper settings on the amp and one is for line in input voltage.this could be my problem, as it sits it is set at the +20 setting =100-300mv I guess tomorrow I will have to get out my multimeter and check voltage and set the jumper accordingly. I wasn't planning running this amp with the factory deck, I just want to test it and know it works before I put it up in the closet until I get a aftermarket deck and higher power subs.I figured there should be some sound coming out the speakers even if the jumpers are not correct. Keep in mind it will go into protection mode if the speakers are wired wrong or if the ground is inadequate. "Paul Vina" wrote in message news:62SGb.138988$8y1.419204@attbi_s52... I think the first thing I'd check is to make sure that the amp isn't in protection mode and that it's getting a signal. Paul Vina "Dan S" wrote in message news:9qQGb.658450$Tr4.1665823@attbi_s03... I recently bought a used xtant 1001dx 1000 watt class d amp.I connect amp, red power light comes on but no sound out of the subs, anyone know what could be wrong?Does anyone here know anyone that can repair these in northern California? |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT? Win98SE, help with audio recording from sound card? | General | |||
high pitch sound | Car Audio | |||
Ford Premium Sound CD install in a car that doesn't come with Premium Sound? | Car Audio | |||
Mediocre SQ with perfect 12.1's, Inconsistent , rough, sound | Car Audio | |||
FS Xtant 3150c with options | Car Audio |