Home |
Search |
Today's Posts |
#1
|
|||
|
|||
DIN / Double DIN / ISO-DIN
Is there any where that I might be able to find exact measurements and
screw hole locations etc for these standards? I am interested in designing and manufacturing an in-dash device and need drawings or dimensions of these standards to design my casing around. I have only been able to approximations so far. Thanks! |
#2
|
|||
|
|||
Why don't you just buy some used or even defective one's, then you can get
exact measurement and be able to use them to test also. -- The Clown Prince of Car Stereo "dennispg" wrote in message oups.com... Is there any where that I might be able to find exact measurements and screw hole locations etc for these standards? I am interested in designing and manufacturing an in-dash device and need drawings or dimensions of these standards to design my casing around. I have only been able to approximations so far. Thanks! |
#3
|
|||
|
|||
Not a bad idea, but I'd like to avoid that if possible.
Since its a standard I would think all the dimensions and tolerances should be available somewhere/somehow. I looked thru the ANSI site, but I dont know exactly what to look for there. |
#4
|
|||
|
|||
On 21 Mar 2005 19:01:14 -0800, "dennispg" wrote:
Not a bad idea, but I'd like to avoid that if possible. Since its a standard I would think all the dimensions and tolerances should be available somewhere/somehow. I looked thru the ANSI site, but I dont know exactly what to look for there. Well, the ANSI site is probably the wrong place to start, since that's the American National Standards Institute, and DIN is a German standard (Deutsche Industrie Norm). That being said, I don't think there's a standard for either depth or screw location. Basically, the DIN standard just defines the size and shape of the opening. A single-DIN opening is 50mm by 178mm, and a double-DIN opening is 100mm by 178mm. -- Scott Gardner "What do you call a drummer without a girlfriend? Homeless." |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Method for a double blind test with details, please! | Tech | |||
better digital double effect | Pro Audio | |||
mixing double bass, kick & el. bass | Pro Audio | |||
List of NOS mostly tubes | Vacuum Tubes | |||
Philips EL86 SEPP OTL Double Chokes Information | Vacuum Tubes |