Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Sountracs MPX 34 x 8 - Need EDAC/ELCO Pinout
Hi
I'm installing a Soundtracs MPX 34x8 console at a friend's studio. If anyone knows the EDAC pinout that Soundtracs used that will help immensely. It's not the ADAT pinout I tried that. There are two 56 PIN EDACs for 8 channel send returns ( 1 to 8 & 9 to 16 ) for the multitrack One 56 Pin called "master" - for CR Monitors, Mains Aux and subs. Just need to know what goes where. Thanks Nick |
#2
Posted to rec.audio.pro
|
|||
|
|||
Sountracs MPX 34 x 8 - Need EDAC/ELCO Pinout
On Oct 4, 7:01*pm, N wrote:
Hi I'm installing a Soundtracs MPX 34x8 console at a friend's studio. If anyone knows the EDAC pinout that Soundtracs used that will help immensely. *It's not the ADAT pinout I tried that. *There are two 56 PIN EDACs for 8 channel send returns *( 1 to 8 & 9 to 16 ) for the multitrack One 56 Pin called "master" - for CR Monitors, Mains Aux and subs. Just need to know what goes where. *Thanks Nick You might try this guy: http://www.thesoundtracsguy.com/ Hope that helps Cheers, Mark |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
ADAT ELCO-EDAC cable - balanced plugs and unbalanced direct outs | Pro Audio | |||
Looking for a used, cheap Elco (Edac) crimp tool | Tech | |||
Looking for a cheap, used Elco (Edac) crimper | Pro Audio | |||
Looking for a cheap, used Elco (Edac) crimper | Pro Audio | |||
Looking for a cheap, used Elco (Edac) crimper | Pro Audio |