Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.audio.pro
[email protected] garyv52@gmail.com is offline
external usenet poster
 
Posts: 79
Default Event 20/20 bas Filter Cap Question

I have an original set of Event 20/20 bas self-powered monitors which started making a hum on one side. I removed the amplifier assembly and noticed one of the filter capacitors is bulging a bit. I replaced the filter caps on a set of self-powered Tannoy's several years ago with excellent advice from this group so I thought I'd ask again.

The original caps are Rubicon C E 63V 10000 uF (M), unsure what the 'M' is for. Perhaps if someone could steer me towards a particular brand/type which would be suitable. I wasn't successful using the DigiKey filters to locate a suitable replacement. Any help would be greatly appreciated.

Gary V
 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynakit 70 filter cap question GuitarPsych Vacuum Tubes 8 December 18th 06 01:04 PM
Filter theory question for speaker crossovers [email protected] Tech 8 May 31st 05 02:03 PM
question about sub sonic filter Don Joe Car Audio 1 June 7th 04 01:46 AM
Question High pass filter for NHT tweeter? Quan Tran Tech 0 November 16th 03 04:39 PM
Low pass filter question... GregS Car Audio 0 July 3rd 03 07:07 PM


All times are GMT +1. The time now is 01:27 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"