On 2/16/2017 12:21 PM, PStamler wrote:
On Thursday, February 16, 2017 at 1:07:31 AM UTC-6, Paul wrote:
On 2/15/2017 10:13 PM, PStamler wrote:
At the risk of incurring a personal attack, I wish to report that I have tested common commercially-available capacitors, looking for the resonant frequency (frequency at which the device's impedance bottoms out; the cap stops behaving like a capacitor above this frequency and starts behaving like an inductor). The lowest resonant frequency I found was 5.3kHz, well within the audio range.
What was the capacitor value for that measurement?
It was a 3,300µF/50V Panasonic Series NHG electrolytic.
http://www.murata.com/~/media/webren...ow/12to14.ashx
So resonant freq f=1/(2*Pi*(L*C)**0.5)
So L=273nH.
So you had 273nH of parasitic/lead inductance? BULL****.
Also, where in the **** would you need such a large cap
in a speaker crossover?
IF DON'T WANT PERSONAL ATTACKS, DON'T MAKE STUPID **** UP!!!