Can you run Phantom Power to non-condenser mics?
I also have a board with a power switch the problem I have is getting noise
out of my speakers when I have the phantom power on. The noise is worse
when I have one or more of my Samson wireless mic's plugged in.
--
George H. Sherlock
"Ray B." wrote in message
news:_j5xb.230400$mZ5.1738472@attbi_s54...
Hey all.
Kind of a stupid question, but here goes (have mercy):
I have a mixer that has a "global" phantom power switch - i.e. when you
turn
it on, ALL the XLR balanced inputs on the board get 48v phantom power. I
have 2 condenser mics which need phantom power; but I also want to run a
few
additional non-condenser balanced mics (i.e. sm58's or similar) into this
board.
So, my question is...do I risk any damage to either the mics or the board
if
I run those non-condensor mics into a balanced XLR input that has phantom
power turned on? I'd like to avoid having to buy 2 separate phantom power
supplies just for those 2 condenser mics, given the fact that my current
board does have phantom power.
TIA,
ray
|