light fader recommendations for studio rooms?
Richard Crowley wrote:
"Frank Stearns" wrote ...
IIRC (and correct me if I'm wrong), *some* power diodes will have a
nasty
transient at conduct/non-conduct. This might or might not be a problem
in
the RF range, but a snubber cap parallel with the diode should take
care
of the problem.
Around 0.6v (for silicon)
That is what I call "insignificant"
Throw a couple hundred amps into that 0.6V drop and you can have a really
annoying RFI source.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
|