[Bob Larter]

Readily Visible wrote:
The tranny in question is 2SD358 on the left channel side. It is one of
those that drives one of the output trannies. The solder joints are hard
to access, but look to be well soldered,

On heavy parts - especially heatsinked ones - it's entirely possible for
a good looking joint to be dry internally. I'd desolder all the pins &
resolder them from scratch.


--
W
. | ,. w , "Some people are alive only because
\|/ \|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------