View Single Post
  #2   Report Post  
Mark Wilkinson
 
Posts: n/a
Default Subwoofer bass rolloff

(---MIKE---) wrote in message ...
I have a large listening room which needs several sub-woofers to give
adequate bass. I am only interested in the range above about 32 hz.
When I play some recordings with organ that have strong output below 32
hz, the woofers give signs of distress. What is the best way to reduce
the input to the subs below 32 hz?


-MIKE


As Tom posted, you need a high pass filter. I think the way to go is
with a dsp xover/loudspeaker manager. Most all prosound setups use
them to protect the subs, and integrate the subs with the mains, along
with a host of other functions. You of course don't need all the
functions, but they've become so dang cheap ..... take the Behringer
dcx2496 at less than $350 street .. it will give you high pass
filtering with adjustable slopes/types up to 48 db/oct, along with
complete xover funtions if you wish to alter the overlap between mains
and subs (that is low pass the subs and high pass the mains). IMO,
this is invaluable for dialing in a system. You'll get full input and
output level controls, parametric and graphic eqs (number of limited
only by dsp resources), and delay/phase compensation, as well as the
standard polarity functions. You CAN use all these functions. Rane,
dbx driverack, bss, xta, are other brands at an array of slightly
higher to waay higher price points. If you want to get really snazzy,
look into the combination matrix mixers/speaker managers. Biamp,
Symetrix, Rane, Mackie industrial ... if you're playing with multiple
channel audio, or need different speaker configurations without
hooking/unhook gear, these things are friggin great.

The only downside to them that I see (it's not sonics -- I've got a
bunch of quality analog gear for comparison, and the dsp's are IMO at
least as clean if not cleaner)is that you have to expand your system
knowledge. They take a while to master, but it's well worth the
effort.

I guess I've gotten a little carried away with a gear recommendation
when all you specified is a simple HPF ... it's just that the dsps are
so cheap, and you can learn so much, AND most importantly,improve your
sound. FWIW