Advice on replacing an Ampzilla cooling fan? - Update
On Mon, 11 Aug 2003 21:00:40 GMT, "Trevor Wilson"
wrote:
**You still can't lower the speed much below 40% of maximum PRM. That ain't
speed control. A resistor in series with an AC fan is just as precise.
Or he could use a simple PWM circuit to control the speed of the fan.
That should get it down as slow as he wants and would give the most
consistent results. I think a series resistor would yield variable
results, especially for low RPMs. OTOH, he could bypass the resistor
with a large capacitor to give full voltage for a brief moment when
the fan is turned on, hopefully avoiding a turn-on stall. Or maybe
make a variable voltage regulator that applies full voltage at turn-on
and then relaxes to the required minimum voltage over a period of a
second or two.
--
Thine
|