View Single Post
  #1   Report Post  
Posted to rec.audio.pro
[email protected] blackburst@aol.com is offline
external usenet poster
 
Posts: 162
Default Need CLIPS for pairs of audio faders: Scott, Mike, others?

Can any of our audio gurus point me to a specialized piece of audio
"equipment," either pre-made or some obvious home-made solution?

In my PEG Access TV studio, most of the inputs to our audio mixer are
stereo, and they end up on two separate faders, panned L-R. I have
seen mixers with clips that make the two faders move as one. Any idea
where I could get some? (A primitive device which clips onto or is
screwed over a pair of faders).

I can anticipate the obvious question - what brand-model of mixer. I
don't know! We're currently using a 32-in Mackie and a similar
Behringer, but I plan to buy a new mixer, brand undetermined.

(I did a post here a few weeks ago about what mixer to get for a TV
studio with many stereo inputs. None of the research I've done has
turned up a suitable (and affordable) "broadcast board" (with many
stereo inputs), so I'll probably be using a monster recording/live
board.)

Many of our users are amateurs, and it is hard to get them to use
pairs of faders. I am hoping a clip on each pair would make it more
obvious, even unavoidable.