View Single Post
  #112   Report Post  
Posted to rec.audio.tubes
John Byrns John Byrns is offline
external usenet poster
 
Posts: 1,441
Default Low Frequency Mains Noise

In article ,
Ian Bell wrote:

Arny Krueger wrote:

no link to BC6 manual provided after second request

That's all we need to know, Ian. You can neither put up nor shut up. Please
post again when you want to at least pretend to be a man. :-(



There is no link to a BC6 manual - it is not available on the net.
You'll have to put your money where your mouth is and buy one Mr. Zero
Credibility.


Or he could simply look it up in an RCA catalog of the era, although it was my
observation that the specs. for much of this type of equipment was grossly
understated. The specs seem to have been written around FCC technical
requirements of the time, e.g. 50 Hz to 15 kHz frequency response, and 60 dB
signal to noise ratio, as well as typical broadcast industry operating practices
like 18 dBm output levels. While the specs. provided some margin relative to
requirements, the actual operating performance was generally considerably better
than spec., also allowing for aging and etc.

--
Regards,

John Byrns

Surf my web pages at, http://fmamradios.com/