[Edi Zubovic]

On Fri, 08 Feb 2019 11:05:34 -0600, Chuck wrote:

Hi David, did you have any luck in fixing this... coz I have a same problem.
Unfortunately the Service Manual that I found on the net is in German.

Kres
There is a plate that moves back and forth under the arm assembly. A
pin with a rubber boot presses against the plate. That boot can wear
out. Back in the day, I repaired thousands of Duals but I have no idea
where you could obtain the boot today. If the boot is still there you
could try cleaning the bottom of it and the top of the sliding plate.
Put a thin layer of GC Phonolube on the plate and let it cycle for
awhile. If you are lucky, it will begin working again.


Hello R.A.P. after a long long time, Hello Scott and other members.

-- Yes this is a known problem with Dual changers, go to German Ebay
and search for "Dual Steuerpimpel".

Best,

Edi Zubovic, Crikvenica, Croatia