Thread
:
Connecting the AKG 8000S to the PC
View Single Post
#
4
Posted to rec.audio.pro
bharat
Posts: n/a
Connecting the AKG 8000S to the PC
Thanks for the suggestions guys. Can you give me the specs. of the
adapter I need to connect the XLR cable to the mic input?
Pooh Bear wrote:
wrote:
I got an AKG 8000S recently and have been wanting to plug it into my
PC. I use the sound card that came with the PC that has a standard
1/8"jack.
It's not 1/8" btw. It's 3.5 mm. Americans just can't bear to use the word mm it
seems.
I got a 1/4" - 1/8" adapter and tried connecting it.
Since an AKG D8000 comes with an XLR how have you wired it to a 1/4" jack ?
Connecting it to what btw ? The line input isn't any good for mic level, it's
too insensitive.
The mic doesn't seem to work. What could be the issue? Does it need a pre-amp
or something?
If the sound card doesn't have a mic input it won't. Also sound card inputs
typically have a DC voltage for 'biasing' electret mics which may upset a
dynamac mic.
In any case a sound card mic input is dreadful quality and you'll get inferior
results. Get a small $60 Behringer mixer to use as a decent mic pre and use the
sound card line input. That'll also mean you can use a decent XLR connector on
the mic.
Graham
Reply With Quote