c6XX starter kits capabilities
In article , Mike Morris mike
wrote:
The subject line pretty much says it all - I'd like to
build or buy a few 8w and 40w flourescent tube driver units.
Somewhere there has to have been a construction article in a magazine.
Greetings. First, you might want to fix that return e-mail address...
right now it's just "mike" and that's a tad generic ;-)
Second, if you're determined to build your own (there are advantages
like fixability, duplication, off-shelf parts, ease of modification)
MARK V (kit place) sells a nice kit. It's Order #: TY-2 and costs
$14.75 (you can get an assembled/tested unit for $20.50) and here's
the blurb:
"This unit drives 6-40W fluorescent light for portable and emergency
use. Works from 7.2V to 16VDC battery. Includes a 'Hi-Efficiency
Switchmode IC Driving Circuit' suitable for use with different
lights. 1lb"
A friend of mine got one recently and said that the kit was complete,
the
PCB was nice, and it worked the first time. I ordered a kit from them
back
in 2006 and they were prompt. They've been around since '85...
I'm sure other places sell these as well but this is the only one I
have experience with. BTW, the JCWhitney one is very similar to all
the "el-cheapo" lights that you can find in gizmo-stores. I got one
dead and the switching transistor was undersized and shorted... not
pretty. Also, they are usually designed with custom-marked parts so
have fun in drawing out the schematic and fixing it...
Their address is:
Mark V Electronics, Inc.
8019 E. Slauson Ave
Montebello, CA 90640
http://www.markvelectronics.com/store
1-800-521-MARK/1-800-423-FIVE
Free Catalog from (213)888-8988
Fax: 213-888-6868
Just a happy camper :-)
Take care.
P.S. Pardon that last pun ;-)
--
+--Filip "I'll buy a vowel" Gieszczykiewicz | E-mail:
| http://www.paranoia.com/~filipg | Sci.Electronics, RC, Misc FAQs +
MORE!
| Enjoy your job, work within the law, make lots of money : Choose any
two.
| Making money with CS and spending it on robotics, life & friends. !
NOT(!PC)