[John Williamson]

On 15/10/2017 01:30, wrote:

Started stuffing the boards, wanted to use IC sockets. The last thing was inserting the Op-Amps. That's when it dawned one me, the mirrored board pin-out was reversed. I called myself a dumb Jack As*. I did the worst thing possible, and bent the IC pins over. Took it home and it worked like a champ! Was nice to thank Walter, online, many years later.

The easy way would have been to mount the IC on the copper side of the
board. ;-)


--
Tciao for Now!

John.