Bridge or Center Tap?
On Wednesday, 26 September 2012 22:34:04 UTC-4, Phil Allison wrote:
"Charles"
"Paul D. Spiegel"
For my next project I have acquired a transformer with two identical 450v
secondary windings.
(snip)
** Be far easier to do the test I suggested - OR, with your test, use a
simple current meter in the primary - OR just wait and see if the tranny
warms any more than usual.
... Phil
Do it the way Phil says... voltage or current measurement, voltage is a bit easier. The warming-up test is less precise, hard to remember how warm was warm!
Cheers,
Roger
|