View Single Post
  #5   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default Event 20/20 bas Filter Cap Question

wrote:
I have an original set of Event 20/20 bas self-powered monitors which start=
ed making a hum on one side. I removed the amplifier assembly and noticed o=
ne of the filter capacitors is bulging a bit. I replaced the filter caps on=
a set of self-powered Tannoy's several years ago with excellent advice fro=
m this group so I thought I'd ask again.

The original caps are Rubicon C E 63V 10000 uF (M), unsure what the 'M' is =
for. Perhaps if someone could steer me towards a particular brand/type whic=
h would be suitable. I wasn't successful using the DigiKey filters to locat=
e a suitable replacement. Any help would be greatly appreciated.


Digikey filters are great. Use the pin spacing, and look for something
rated for 105C from Panasonic. Make sure the outside diameter and length
aren't so much larger that it doesn't fit, but nobody can do that for you
without seeing the board. Always specify "in stock" in the search as well.

Initially when Digikey opened up, Panasonic was the only capacitor
manufacturer that they carried, so I just got in the habit of using them
from Digi-Key. Other vendors are fine but I tend to buy Panasonic all other
things being equal.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."