View Single Post
  #2   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default Event 20/20 bas Filter Cap Question

On Tue, 11 Feb 2020 10:02:49 -0800 (PST), wrote:

I have an original set of Event 20/20 bas self-powered monitors which started making a hum on one side. I removed the amplifier assembly and noticed one of the filter capacitors is bulging a bit. I replaced the filter caps on a set of self-powered Tannoy's several years ago with excellent advice from this group so I thought I'd ask again.

The original caps are Rubicon C E 63V 10000 uF (M), unsure what the 'M' is for. Perhaps if someone could steer me towards a particular brand/type which would be suitable. I wasn't successful using the DigiKey filters to locate a suitable replacement. Any help would be greatly appreciated.

Gary V


Find something of the right mechanical size here. Digikey are a good
supplier

https://www.digikey.co.uk/products/e...=1&pageSize=25

d