Mic preamp build?
Scott Dorsey wrote:
Run some numbers, it's very interesting to watch. You still get a dramatic
increase in distortion near the zero crossing. It's enough distortion you
can use that old HP 334 and see it with a test jig.
** There is NO distortion in the arrangement AS SHOWN !!
Everything has distortion.
** Really?
Even your barking mad opinions.
Check out Doug Self's book on power amplifier design. Again, the issue
isn't the frequency response, it's distortion from the ripple across the
capacitor.
** Which does not exist in the circuit shown as the 10uF caps are DC biased.
DIfferent issue, not related to DC bias.
** ********.
Again, check out Self's book.
** I know what Doug S wrote.
You are wildly miss-interpreting.
..... Phil
|