View Single Post
  #2   Report Post  
Posted to rec.audio.pro
Mike Rivers[_2_] Mike Rivers[_2_] is offline
external usenet poster
 
Posts: 2,190
Default How to send loop to 2 amps and lead to 1 with loop pedal ?

On 1/1/2019 2:14 PM, wrote:
So I want to send the rhythm loop to my amp and another amp being used as the drummers monitor then play lead but not have it come out the drummers monitor amp because it confuses him and he looses the beat. Is this possible ?


It's not clear what confuses your guitar player - the looper or your
guitar playing. Assuming he wants to hear the looper (as if it were a
rhythm track), plug a Y adapter into the output of your looper. Connect
one branch of the Y to one channel of your amplifier and the other
branch to the drummer's monitor. Then connect your guitar to the other
channel of the amp.

If the drummer wants to hear your guitar but not the looper, you could
connect the Tuner or DI output of the guitar channel on your amplifier
to the input of the drummer's amplifier.

There are lots of options, depending on what you actually want to to do
and how you're using the mixer and AC 60 amplifier. I'm assuming that
your amplifier is, or is similar to this:

https://www.manualslib.com/manual/62...-2.html#manual


--
For a good time, call http://mikeriversaudio.wordpress.com