View Single Post
  #120   Report Post  
Posted to aus.hi-fi,rec.audio.tubes
bassett[_2_] bassett[_2_] is offline
external usenet poster
 
Posts: 140
Default Tube/Valve Amp Noise (attention Alan and Iain)


"roughplanet" wrote in message
...
"Trevor Wilson" wrote in message
...

"Patrick Turner" wrote in message
...

I never read what Trevor says about ME amps or the way transistors are
matched because its all empty sales talk and utter BS.


**Read the above very carefully. THIS is exactly what I am talking about.
Every tech on the planet claims to know more about ME amplifiers than
Peter Stein does. They WILL NOT fit critically matched devices, even when
specifically instructed to do so. They will always take the easy (cheap)
way out. As a consequence, the performance and reliability of the product
will suffer. I know. I've seen the messes that have been created by
second rate techs, who think they know it all.

All the schematics in the world will not help, as long as techs think
they know more than Peter does about his own product.

I know, from my own experience, that some high Global NFB products
benefit from the use of matched devices. In a product with no Global NFB,
the importance of matching becomes far more crucial.


Gawd TW, You have dug yourself a hole so deep that you will never get out
of it now, no matter what.

Why not go away & have a good think about the logic, or rather, the lack
of it in what you have said, and then come back & TELL THE TRUTH, THE
WHOLE TRUTH & ONLY THE TRUTH to the other members of this group.

You will gain at least some respect; more than if you just keep banging
away at the same old gong, which is now badly dented & in need of
replacing.

ruff

No ****'in worries about the Gong Mr Ruff. His mate David will give it
an upgrade.


bassett