[Peter Larsen[_4_]]

On 23-04-2018 14:24, wrote:

2) There's some auto-switching between the channel inputs of the same line whereby if you plug something into the R channel, you have to have something plugged into the corresponding L channel.

Appreciate any augmentation to my knowledge on this topic.

Thanks,
- DK

yes there is switching.

if you have a mono source, plug it onto L in and it will feed both L and R.
if you have a stereo source plug L to L and R to R.

plugging only one input into the R is not defined.

Or there is a problem with the switch in left channel. I do not see it
mentioned whether it worked as intended: as a stereo input.

mark

Kind regards

Peter Larsen