On 9/16/2010 3:30 AM, Arfa Daily wrote:
"Smitty Two" wrote in message
news
In article ,
David Nebenzahl wrote:
Sure enough, removing the nut
from the phone jack allowed the whole unit to slip rather easily out of
the case
Sheesh. You "shoulda" known enough to do that, at least. Good grief.
Its not really self evident that the jack is connected to the PC board.
When i took mine apart, i certainly did NOT think it was that way. I
eventually figured it out, but it took a while. i assumed it was just
a raw jack connected with loose wires to the amplifier.
bob