View Single Post
  #15   Report Post  
Posted to rec.audio.tech
~misfit~[_3_] ~misfit~[_3_] is offline
external usenet poster
 
Posts: 96
Default Vintage speaker repair advice wanted...

Somewhere on teh intarwebs Trevor wrote:
"~misfit~" wrote in message
...

Yep, I've made a few boxes (and have the software to prove it - these
days) so know all about TS params. However, as I alluded to in my
other post - I've seen "10 inch" drivers (for instance) with cones
that vary by around two inches in diameter. As most speaker-buyers
will never need to know what size a replacement driver will need to
be it could potentially be very misleading.

I mean, if your average punter is looking to buy speakers and it's a
toss-up between two different brands, both 3-way with a "10 inch"
woofer (which vary by the afore-mentioned 2" or thereabouts) said
punter might not know that in fact one woofer has 30% more cone area
than the other. After all they're both 10" right?


Frankly it's irrelevant. You can buy a box with a 10" driver for $100
or one with an 8" driver for $10,000. No-one in their right mind
would think the $100 box is better because it has a bigger driver.


So you'd be happy to buy cars defined by their wheel base (rather than what
that wheel base contains) then huh?

Okay.
--
/Shaun.

"Humans will have advanced a long, long, way when religious belief has a
cozy little classification in the DSM."
David Melville (in r.a.s.f1)
[Sent from my OrbitalT ocular implant interface.]