On 1/15/2021 12:29 AM, wrote:
Paul wrote:
==========
This is on an Ampeg VT-60 amp. Here is the schematic:
https://ampeg.com/support/files/Sche...SCHEMATICS.pdf
It was the main AC fuse F1, a 2.5 Amp Slow-Blow fuse, that was blown open.
Then I noticed the single 12" 8 Ohm speaker, was incorrectly hooked
up to the 16 Ohm output. Was this possibly the cause of the blown
fuse?
** Wot an idiotic question.
Wot an idiotic answer!
Do some investigations FFS.
Go change your diapers, FFS!