Pultec EQP clone problem
gareth magennis wrote:
===================
Any thoughts on this? I'm getting rather frustrated.
** Motorboating in audio stages that do not use NFB is caused by supply rail coupling of imposed signal from the later stages back to the first stage - usually at a sub sonic frequency.
The inter-stage coupling caps are way too large at 270nF - try 22nF instead for each.
This shifts the -3dB point up to to 7 Hz.
Increasing the PSU filter caps - by paralleling with a 47uF - will also help reduce LF coupling.
...... Phil
|