"Frank Stearns" wrote in message
...

Well, heck. I rumaged around and found a UTC 0-1: 50K on one side and
500/200/50 on the other and also another Triad with 85K on one side and
600/250/50 on the other.

I figured 50K+ through a transformer might be too high to drive the low
side with any respectable amount of level. I'll try it.

The first transformer, set up to use the 500 ohm secondary (50k:500 ohms)
will load the microphone very little, which is good. It'll also step down
the level 20dB. If that's not a problem, I'd go with it.

Peace,
Paul