[sTeeVee]

On Tuesday, February 11, 2020 at 1:02:53 PM UTC-5, wrote:
I have an original set of Event 20/20 bas self-powered monitors which started making a hum on one side. I removed the amplifier assembly and noticed one of the filter capacitors is bulging a bit. I replaced the filter caps on a set of self-powered Tannoy's several years ago with excellent advice from this group so I thought I'd ask again.

The original caps are Rubicon C E 63V 10000 uF (M), unsure what the 'M' is for. Perhaps if someone could steer me towards a particular brand/type which would be suitable. I wasn't successful using the DigiKey filters to locate a suitable replacement. Any help would be greatly appreciated.

Gary V

Almost doesnt matter what the physical config is as long as electrical nd thermal specs are met. If you are having any trouble chasing down the exact mechanical specs you can always afix the cap internally and jumper into the circuit by soldering pieces of insulated wire on all ends. Good luck