Doug Sax on wire
geoff wrote:
Ty Ford wrote:
Best I can remember, relative to the house belden cable, one cable
cause a slight bump around 200 Hz the other was a bump around 6 k. I
think the GAC-3 was on the bottom and the 2220 was the 5-6k.
These bumps are peresumably less that a (small) fraction of a dB ? If
other than that, unless extreme lengths involved, I suspect there was some
other factor working there, othe than cable.
Yes.
Very curious. I can't see any cable characteristics kicking in at frequencies
that low. Would be interesting to know more, especially how long the cable run
was, source and destination impedances too.
Graham
|