[WindsorFox]

John wrote:
More information about the setup and specs is needed to help you.
Whether you're using an external amplifier or head unit power, you
should just match it to the tweeters (less power to be safe as you want
to protect them). Also, use a proper crossover, highpass filter, or
whatever you choose to control what frequencies go to the tweeter. You
could also use an L-pad, resistor, fmod, or polyswitch (a fuse in
reality)...etc...etc...

John


Well I hit the send by accident. You're way over thinking the
question. It's not car audio but I asked here not because the equipment
is relevant, but because I figured the question was. So a Carver amp at
@ 750 wpc at 6 ohms into Mirage M1 speakers.