Can you run Phantom Power to non-condenser mics?
Bob Olhsson wrote:
In article , Fletcher
wrote:
This is true in most cases...
My understanding is that the problems arise with mikes having a
grounded center tap on their output transformer. Other problems are
hot-plugging mikes with the power on or using a microphone patch bay
that has phantom power running through it.
Yup, it's the centre tap that screws it up for sure.
Hot-plugging prolly explained a few mic I/P failures on Studiomaster
desks prior to me - lol. A few diodes to the supply rails fix that.
Graham
|