Quote:
Originally Posted by Mister.Lull
....A different deck than the last question. Interesting...
The yellow wire from the HU will be fine connected to the constant
power wire that already exists (no need to run a wire directly to the
battery).
Wiring your amplifier directly to the battery should be fine - just
make sure the wires are as short as possible.
Next, etiquette:
Did your other question get answered in a satisfactory way? Please
let us know one way or the other.
Also, there's no need to start a new thread - you could have simply
gone off of the other one (after letting us know if your problem was
solved or not)...
~Mister.Lull
On Mar 20, 4:46*pm, alpine user
wrote:
hey guys 2 other questions , the yellow wire on my 9884 alpine hu says
connect to battery,i just connected to the hot wire that stays hot all
the time behind the hu, should i connect it to the battery ? and if so
should i use a 10 gauge wire?
next question is, * * i have a 77 corvette and the battery is right
behind the drivers seat , right where my amp is setting and i ran the
negative wire from the amp to the neg on battery, is that ok?
--
alpine user
|
yes it did indeed help me out with the 7893 ,the stereo happens to be my sons that has a jeep grand cheerokee which has a internal amp.
now thank you for the help on my stereo which is the 9884.
I'm very sorry for starting a new thread.