View Single Post
  #4   Report Post  
Posted to rec.audio.tubes
[email protected] themend@gmail.com is offline
external usenet poster
 
Posts: 18
Default Restoring a TV-7/U Tube Tester

As a side note to the section below, this picture shows the diode strip installed, but the connections on the push button strip have not yet been de-soldered, cleaned, and had their new wires attached. These are the correct points, though.


https://www.dropbox.com/s/iuv84wy7lx...onnections.jpg



The red circle shows where the positive diode will connect, the black circle shows the negative connection, and the blue circle shows where you solder the mounting lug of the diode strip, and the common connections of the two diodes.