thats pretty sweet, when i made my car-puter i had to make my own P.S. for
the system.. Pre-made makes things a helluva lot easier..

DJ TecThreat

"Mark Zarella" wrote in message
...

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=36 70&
rd=1

Computer Power Supply

12v input (for car use)

8-16vdc input

AT output connections

12v remote turn-on - great for car applications

Standard size

Binding post power connections

100% equipped "NIPPON CHEMI-CON" super high reliability Aluminum
Electronic
Capacitors

60KHz Switching Frequency Control IC inside

High precision and stable DC outputs for long term operation

+12v peak current: 4A

+5v output current: 5A

+12v output current: 2A

-5v output current: 0.3A

-12v output current: 0.5A

The peak to peak ripple and noise for +5V is less than 50mV. As for the
other outputs are less than 100mV.

The output line regulation for +5V is less than +/-1%, for +12V is less
than
+/-2%, for -12V and -5V is less than +/0-3% while measuring at rated
loading
and +/-10% of input voltage changing.

The built-in over voltage protection circuit will shut down the outputs to
prevent damaging external circuits. The trip point of crowbar circuit is
around 5.7V to 7.0V. The power supply will go into hiccup mode against
short
circuit or over load conditions, and will auto recover while faulty
conditions are removed.

The efficiency is higher than 73% by measuring at nominal line and rated
load.

Add actual shipping charges from NY (under $10 for cont US)

email: zarellam at twcny dot rr dot com