On 12/11/2019 1:39 pm, jtees4 wrote:
On Mon, 11 Nov 2019 19:00:53 -0500, Paul Babiak
wrote:
On 11/11/2019 05:28 PM, jtees4 wrote:
This is aguitar related, hopefully it's OK to post here....I know you
folks will know the answer.
I have a Headrush gigboard on the way....I already know I will need a
new power adapter for it. The manual says:
Input Voltage 19 VDC, 3.42 A, center-positive
Is this enough info that maybe you can point me to what I may need (I
am in US).
Thanks so much!
Please check out my music:
http://www.soundclick.com/bands/defa...bandID=1430296
https://www.amazon.com/s?k=headrush+...ref=nb_sb_noss
Thanks for both links. It's funny, I saw the exact same one as the
first link on EBay....but that had some of the number blurred (it
looked like on purpose)....so I wasn't sure I could trust it. I didn't
even think of looking at Amazon. Much appreciated.
Please check out my music:
http://www.soundclick.com/bands/defa...bandID=1430296
None of those appear to be able to supply 3.4 Amps (which does seem
rather a lot). Maybe the expensive one will, but it doesn't specify in
the listing.
Also you need to be sure you have the right DC connector. If there is a
2.5mm plug into a 2.1mm socket there will be a poor connection, and
possibly even a burn-out of the plug/socket. To check, get a 2.1mm plug
and if it fits then that's what it is. If it doesn't fit you'll need a
2.5mm plug. I would be a bit doubtful about using one of those PSUs with
an array of connectors that clip onto a universal adaptor on the lead -
is that high current is for real and not a typo.
Maybe best get a real replacement Headrush PSU ?
geoff