Thanks for your reply. In answer to your question - This is a faith based
initiative. I broke in many speakers when I had a stereo storefront. On a
few speakers, especially smaller bookshelf speakers with rubber-surround
woofers the change was dramatic. From this I make the assumption that all
speakers probably benefit to some degree. And since the only cost is a
little time, I always break in my speakers. his particular speaker is the
best I've ever had and I want to get the best from it. Having the Gallo
national sales manager tell me that they believe in break-in and that the
initial field reports are that break-in is important for these speakers
confirms me in my desire to do a good job.

I appreciate your suggestion, but I am still wanting to go a bit further
that just playing some unspecified music for an unspecified time. Given the
number of energetic audiophiles I thought maybe someone had done some
experimentation and would share the results..

Wylie Williams


wrote in message ...
Place the speakers face to face, especially the wofers, and switch one of
the feed wires so they are now out of phase. This should cancel greatly
the total sound level while not changing the excursion of the cones. How
will you know if it makes any difference when all is done?


I know that many audiophiles believe that speakers need a period of
break-in
to sound their best, while others disagree.

This post is a request for those who believe in speaker break-in to
provide
advice, and it is also request that those who disagree allow those of us
they believe to be mistaken to continue in the error of our ways without
comment.

I am breaking in a pair of Gallo Reference III speakers in my garage on
24
hour/day FM music, which I plan to stop at 120 hours. I do this on the
advice of Gallo, and am told by Gallo that more power the better, as they
personally believe in break-in, and several reports they have received
say
that for these speakers there is a definite break-in point that must be
reached for best quality. They further recommend using high power for
best
results. My problem is that once I bring these into my living room I will
not be able to give them high power very often, as I have a wife who will
be
disturbed by the noise. I wish to find the best way to continue the
break-in
these speakers a few hours at a time.

While I have hard the general statement that break-in if desirable, I
haven't seen anything specific onwhat to play and how loud. It would be
easy to put a CD on repeat on occasion when we go out. I wonder if anyone
has experience with the best signals to play through speakers for break
in.
Music? What sort? Test CDs? Which CDs? Which tracks?

Wylie Williams
Saint Louis Missouri