One other question: is there a specification on the absolute maximum
signal voltage magnitude for a line level output?
--RY
Randy Yates writes:
cross-posting to rec.audio.pro
--RY
Randy Yates writes:
Dear Audio Professionals,
Questions on levels:
1. If you backtrack to 0 dB from this wikipedia article
http://en.wikipedia.org/wiki/Line_level
the reference levels for dBu and dBV are 0.775 VRMS and 1 VRMS,
respectively. Is this correct? Are the reference levels I've given
here exact?
2. Is there a standard for converting from dBFS to dBu? If so,
what is it?
3. If the answer to 2 is yes, then does that standard use FS sine
or FS square?
Thanks for any insights.
--
Randy Yates % "With time with what you've learned,
Digital Signal Labs % they'll kiss the ground you walk
% upon."
http://www.digitalsignallabs.com % '21st Century Man', *Time*, ELO