Thread: Micing a harp
View Single Post
  #13   Report Post  
Posted to rec.audio.pro
Greg Boboski Greg Boboski is offline
external usenet poster
 
Posts: 65
Default Micing a harp


You may not have time later so throw something up at setup , perhaps
something that normally works well for you with strings or piano
Coming from up top a foot or so facing down to get the overall harp
and minimize leakage .
The danger being that you may use things just because you can , so
of course listen , but it a pressure with that many people waiting it is
good to be prepared .
Have fun , i'm sure it'll turn out fine as long as your paying attention

regards Greg



"Chris Whealy" wrote in message
...
In about 6 weeks, I need to record a performance that includes a pedal
harp. I've never had to mic such an instrument before so I'd like some
opinions on the best way to tackle it.

To provide some background: The harp will be part of a 28 piece orchestra
that is accompanying a 90 member choir plus various soloists. The
musicians are in the corner of the hall. Due to the acoustics of the hall
and layout of the stage area, the string section (violins, viola, cello,
harp) need to be at the back of the orchestra. The spacing between the
musicians is tight (think orchestra pit).

I think a contact mic on the sound board would be a good approach due to
the proximity of other musicians, but I don't know which type would be
suitable. I can usually source most microphones from a local hire
company, so purchase cost is not an issue since we won't be buying.

Experience from anyone who's done this before would be appreciated.

Chris W

--
The voice of ignorance speaks loud and long,
But the words of the wise are quiet and few.
---