Speaker Break In
Walt wrote:
Laurence Payne wrote:
On Fri, 15 Sep 2006 17:15:00 +0100, Eeyore wrote:
I just replaced a driver in an SR cabinet.
The 'new driver' had 4.1 Ohms DC resistance and the 'old' one had 4.8.
Manufacturing tolerances I imagine.
Did the old one measure 4.8 ohm when it was installed, or when it had
to be replaced?
Usually, when a speaker has to be replaced the DC resistance is infinite.
In this case the suspension was damaged.
Graham
|