Fender "The Twin" Power resistor values?
"Gareth Magennis"
Found the problem - the reverb tray input coil (8 ohm) was shorted.
** Bull****.
It normally measures less than 1 ohm on a DC meter.
The 2K7 resistor supplies the reverb transformer primary via the 12AT7
driver, which I have now replaced.
** Yawn......
Now just waiting for another tray.
** Why ?????????????????????????????
Reverb tank drive coils NEVER fail short.
YOU are a ASININE PITA ****WIT !!!!!
............ Phil
|