Thread
:
XLR connectors may be too large.
View Single Post
#
43
Posted to rec.audio.pro
Les Cargill[_4_]
external usenet poster
Posts: 1,383
XLR connectors may be too large.
(Scott Dorsey) wrote:
Les Cargill wrote:
Electronics have no business being in your pocket. They should be
large, consume reams of power and contain life-threatening voltages.
If you're going to build something that can fit in your pocket, you need to
design it so that it can go through the washing machine without damage,
because sooner or later it will.
Yep.
Or you could just put 8 XLRs in one RU like all the prosumer D/A/A/D
modules in the world.
There are standard DB-25 configurations for that too. They work well if you
use the proper machined pin plugs and sockets.
I'd rather ( for some reason ) not have to keep up with the harness.
IMO, you're just pushing the problem out to a patchbay. That could be
cool, it could be not-cool. Depends.
They are somewhat delicate
for field work, but less so than Elcos.
--scott
--
Les Cargill
Reply With Quote
Les Cargill[_4_]
View Public Profile
Find all posts by Les Cargill[_4_]