[Gary Eickmeier]

"Scott Dorsey" wrote in message
...
Gary Eickmeier wrote:

I think you are not getting me. I didn't say if a sound comes from the
rear
it will show to the rear in the pattern, I said that if the pattern shows
to the rear it will decode to the rear.

It does not. If a pattern shows as a \ it means the two channels are
opposite
in polarity and will decode to the rear.
--scott

Scott - not sure what your notation "shows as a \ " means, but I am talking
about the display as in Audition 2, Phase Analysis window. You may have the
other kind (oscilloscope kind?) , which I do not. Mine shows correlated mono
as a narrow pattern straight ahead (up in the window) and out of phase in
varying degrees will show in the bottom half of the display. Pure out of
phase shows straight down, or to the rear, in the pattern.

Tom - might be some confusion in your description of reversed channels to
the rear. As I understand it, the rear info in DPL is mono, not stereo, so
there can be no reversed channels.

Gary Eickmeier