On 5/13/2019 10:53 PM, Paul wrote:
On 5/13/2019 1:00 PM, Paul wrote:
On 5/13/2019 8:45 AM, ChrisG wrote:
On 5/13/2019 6:03 AM, Paul wrote:
On 5/13/2019 3:48 AM, Paul wrote:
On 5/12/2019 3:16 AM, Paul wrote:
Mine looks just like this one:
Â*Â*Â*Â* https://www.matrixsynth.com/2017/07/...ty-joanna.html
The power switch LED turns on, but nothing on the output.
A schematic would sure be helpful....
Â*Â*Â* Oh, nevermind.Â* It works.
I used to successfully employ heavy guitar strings on Farfisa and Vox
organs. They would need to be wound with a metal that could be
soldered though, bronze maybe? I later learned that the original
busbars and springs on better quality instruments were often gold
plated, so I probably caused a lot of destructive wear and tear, but
I didnt know and didnt care in those days. I just wanted the thing
to work when I needed it.
Everything corrodes, but gold on gold is pretty good until it wears
through. If theyre gold, it may be worth transplanting old springs
from the upper keys to the midrange to preserve the busbar, and
kludge the lesser-used contacts.
Â*Â*Â*Â*Â*Â* OK, that sounds like a good idea. Heavy guitar strings.Â* I don't
think these are gold-plated, but I could be wrong.
Â*Â*Â*Â*Â*Â* I just compared them, and the guitar strings are definitely
much stiffer, and less pliant, than the original springs, but it
looks like it should work.
Â*Â*Â*Â*Â*Â* Still, is there a source for the original raw spring material?Â* It
would be better, because the stiffer guitar string would definitely
affect the action and feel of the keyboard a small bit.
Â*Â*Â*Â*Â*Â* But this all answers the question of why there were 10 springs
missing in the first place!Â* They were clearly taken from this unit,
and put into another keyboard.Â* And I noticed on the Vintage Synth
website, that they are selling these springs USED, for about $4 a piece!
Â*Â*Â*Â*Â*Â* Hmmmm....no wonder people like to buy old keyboards for the
parts only!
Â*Â*Â*Â*Â*Â* :/
Â*Â*Â* I just need to clean the key springs, and buy new ones
for the ones that are missing.
Â*Â*Â* But a weird sounding keyboard for sure!Â* Nothing like
that old Italian analog sound!
Â*Â*Â* Ok, can I just go to somewhere like Home Depot, and
get stock spring, to replace the old, worn out key
springs?Â* Like get a long length of it, and cut them
to size?
Â*Â*Â* Here is a picture of similar Crumar key springs:
https://xbs111.files.wordpress.com/2...-springs-2.jpg
Â*Â*Â* Thanks for any advice.
Â*Â*Â*Â* Ok, the guitar string idea works great!Â* 0.052"!
Â*Â*Â*Â* There isn't really an issue with a difference
in the feel of the action, because like most organs,
each key is only ON or OFF.Â* There is no velocity
information, and most of the forces on the key, come
from the thicker main spring of each key, not the thin
contact springs.Â* So consequently, I don't feel a
difference in the action, on the keys with the guitar
string replacement.
Â*Â*Â*Â* But I have found two more issues:
Â*Â*Â*Â* 1)Â* How do I level the white keys on this unit?
Â*Â*Â*Â* 2)Â* The high G# does not decay properly like the other keys.
Â*Â*Â*Â*Â*Â*Â*Â* It almost acts like it has the sustain pedal down all the
Â*Â*Â*Â*Â*Â*Â*Â* time.Â* So it keeps sustaining while the other keys decay
Â*Â*Â*Â*Â*Â*Â*Â* and taper off as they should.Â* It seems like it's some
Â*Â*Â*Â*Â*Â*Â*Â* sort of RC time constant, so I will probe, and check
Â*Â*Â*Â*Â*Â*Â*Â* the components around this key, and compare them to it's
Â*Â*Â*Â*Â*Â*Â*Â* neighboring keys.
Ok, issue #2 has disappeared for some reason, after I cleaned
and did some in-circuit impedance checking. After checking the
keys again, the G# decays properly now.
I also found out how to level the keys. There is a small
plastic box on each key, and a corresponding metal finger for
each key, with a rubber stop on the top and bottom. This controls
the key dip, and the key leveling when at rest.
I could shim each key, but I don't think it's worth my
time, since I think the sound and play-ability of this keyboard
is not exactly my cup of tea. It's kind of like an analog
clavi-chord, with some vibrato, but it's rather limited, with only
the basic clav sound, and a basic electric piano voice.
So I will likely put this unit up on Ebay. I'm sure
a collector of old Italian keyboards will buy it! Definitely
a historical, and rare unit!
