View Single Post
  #1   Report Post  
Posted to rec.audio.opinion
 
Posts: n/a
Default JM Lab Electra 905


"Signal" wrote in message
...
Posted this on rec.audio.high-end, didn't get any answers so let's
have a stab here..... just curious if anything useful can be
interpretted from these plots? TIA




Found some plots of these long discontinued JM Lab mini monitors. Can
somebody pls comment on what they can gleen from these??

http://www.uibel.net/bauvor/electra905/electra905.html

Google translation :

http://translate.google.com/translat...language_tools




--
Sensitivity: 91.5dB 1W/1M although that seems exaggerated judging by the
graph. More like 88dB

Max power 125 watts
Nominal 8ohms impedance
Reasonably flat FR in an anechoic environment, not so good on
stands.Response on stands varies by as much as 5 dB in some areas, but still
not horrible for a speaker.

Like all MTM's bass and systems with small woofers the bass falls off at
around 50 - 60 Hz, and you either need a very small room or a subwoofer for
any kind of decent bass.
There seems to be a bit of a glitch at around 3 kHz which is where the Focal
tweeters are usually crossed over, so expect it to be related to that.