Sample rate conversion question
On Fri, 15 Aug 2008 12:24:51 -0400, "karle"
wrote:
1-Start with a 192khz source, downsample it and play it back at the
downsampled rates on the D to A converter
2-Start with a 192khz source, downsample it and play it back at the highest
rate on the D to A converter
3-Record the same performance at different sample rates and then play it
back at its native sample rate
Well, 2 won't be much use as it will play the sample at the wrong
pitch and speed.
InitiallyI wouldn't worry about the higher rates. Start at 48KHz,
work down from there. See at what figure people reliably start
hearing the difference.
|