Thread
:
Event 20/20 bas Filter Cap Question
View Single Post
#
3
Posted to rec.audio.pro
[email protected]
external usenet poster
Posts: 79
Event 20/20 bas Filter Cap Question
On Tuesday, February 11, 2020 at 12:08:19 PM UTC-8, Don Pearce wrote:
On Tue, 11 Feb 2020 10:02:49 -0800 (PST),
wrote:
I have an original set of Event 20/20 bas self-powered monitors which started making a hum on one side. I removed the amplifier assembly and noticed one of the filter capacitors is bulging a bit. I replaced the filter caps on a set of self-powered Tannoy's several years ago with excellent advice from this group so I thought I'd ask again.
The original caps are Rubicon C E 63V 10000 uF (M), unsure what the 'M' is for. Perhaps if someone could steer me towards a particular brand/type which would be suitable. I wasn't successful using the DigiKey filters to locate a suitable replacement. Any help would be greatly appreciated.
Gary V
Find something of the right mechanical size here. Digikey are a good
supplier
https://www.digikey.co.uk/products/e...=1&pageSize=25
d
Thanks Don. I've been playing with the various filtering options and perhaps narrowed it down somewhat. Although I'm not that familiar with the various mounting techniques. How would I narrow the selection to 2 wires that you solder and clip? Mostly I see these snap on type capacitors. Thanks.
Reply With Quote
[email protected]
View Public Profile
Find all posts by
[email protected]